Green Strength Testing Through Mechanical Means

By Bill Daidone 19-Dec-2019 16:43:09

Raw materials are the most crucial part of making quality bricks. Consistent, high quality raw materials combined with sound processes normally result in good quality fired ware. Unfortunately, in the real world, raw materials vary in quality and consistency. Variations in raw materials such as particle size, fired color, carbon content,  and shrinkage are routinely measured during exploration, mining, stockpiling, and production. Another characteristic of raw materials that is critical and should be measured and monitored is the level of soluble sulfates present in the raw materials used to make brick.

Read more

Temaer: Structural, Ceramics, Green Strength, optimization, Tools

Tools to avoid issues with ceramic tiles

By Miguel Ten 23-May-2019 15:30:00

Ceramic tiles may present some issues during their manufacturing process. Most of them do not have an origin in the process itself, but in the raw materials used in the production line. A proper control in the raw materials and in the process will minimize the potential risks of producing second class materials.

Read more

Temaer: Decorative, optimization, Tools

Measuring Soluble Sulfates in Raw Materials

By Bill Daidone 09-May-2019 08:00:00

Raw materials are the most crucial part of making quality bricks. Consistent, high quality raw materials combined with sound processes normally result in good quality fired ware. Unfortunately, in the real world, raw materials vary in quality and consistency. Variations in raw materials such as particle size, fired color, carbon content,  and shrinkage are routinely measured during exploration, mining, stockpiling, and production. Another characteristic of raw materials that is critical and should be measured and monitored is the level of soluble sulfates present in the raw materials used to make brick.

Read more

Temaer: Structural, raw materials, Ceramics, Scumming, Tools

QUESTION OF THE MONTH: KEY TOOLS TO USE IN CERAMIC MANUFACTURING

By Yaiza Paños 03-May-2019 16:28:51

Measuring results is key to be able to understand how your production is going and if you should make any changes in your supply chain. In today's ceramic market, new tools to measure different parameters appear every year, making it barely impossible to be able to catch up with all of them. However, we have found several that we think might be relevant and a bit more unknown. So this month is all about tools!

Read more

Temaer: Question of the month, Plasticity, Scumming, Tools

BioKeram-logo-1 Additive-A Logo

A blog from BioKeram

BioKeram is a new range of products from Borregaard, the world's leading supplier of high performance biopolymers to the ceramics industry, with more than 50 years experience in the ceramics market. With this blog we aim to share our knowledge regarding ceramic process optimization.


Visit www.biokeram.com

 

Recent Posts

Search the blog