How to deal with efflorescences in Structural bricks

By Yaiza Paños 21-Sep-2017 07:31:00

Why does an efflorescence appear?

In chemistry, efflorescence is defined as the migration of a salt to the surface of a porous material, where it forms a coating. The essential process usually involves the dissolving of an internally held salt in water. The water, with the salt now held in solution, migrates to the surface, then evaporates, leaving a coating of the salt. These efflorescent salt deposits tend to appear at the worst times, usually about a month after the building is constructed, and sometimes as long as a year after completion.

Read more

Temaer: Structural

How to optimize brick production through faster drying

By Jonathan Savage 07-Sep-2017 07:31:00

Before bricks and tiles can be fired the majority of water used in its moulding needs to be removed from the clay product. Any excess residual water or moisture left in the article as it enters the kiln to be fired will be removed very quickly leading to major problems such as blow out, warpage or in the extreme – as has been seen on numerous occasions – to explode causing serious damage to the kiln and production.

Read more

Temaer: Structural, Drying

How to select the perfect binder for shaped refractory bricks manufacturing

By Jack Pongdet 03-Aug-2017 07:31:00

Generally, refractories are classified as basic, high alumina/silica, fireclay and insulating. There are also classes of “special refractories” which include Silicon Carbide, Silicon Nitride, Graphite, Zircon, Zirconia, fused cast and several others. Most refractory materials are supplied as preformed shapes. However, they also are manufactured in the form of special purpose clays, bonding mortars and monolithic such as castable, plastic refractories, ramming mixes and gunning mixes. In fact, many  refractories materials have been developed specifically to meet the service conditions of a particular process. The characteristic properties of each refractory class are a function of both their raw material base and the methods used to manufacture the refractory products.

Read more

Temaer: Structural, Refractory

Different methods for plasticity measurement of a ceramic material

By Rosa Mediavilla 27-Jul-2017 07:33:00

Plasticity is the characteristic behaviour of a ceramic material to become permanently deformed after the application of an external force. This property is the most characteristic one in clays, and there are some factors that influence the plasticity and they should be considered in plasticity measurements:

Read more

Temaer: Structural, Decorative, Plasticity

Clay conditioning without souring

By Jonathan Savage 20-Jul-2017 07:31:00

The first process required to begin the production of clay bricks or roof tiles is to make available the raw materials required for the process. The major material used in manufacture are clays and as such brickworks will have been built as close to a clay quarry as possible although some clays are still trucked in to aid in varying colours and technical characteristics.

Read more

Temaer: Structural

How to reduce breakage and rejection in the manufacturing of bricks and rooftiles

By Jack Pongdet 06-Jul-2017 07:30:00

Breakage and rejection are two of the most common problems in ceramic manufacturing processes and It can come from a wide range of issues. Most  ceramic manufacturers try to reduce  their breakage and rejection as low as possible because small defect in a ceramic product can devalue the  product by more than 50% or even mean a loss for a premium grade producer.

Read more

Temaer: Structural

Eliminating cracks in your brick production: not as difficult as you think.

By Bill Daidone 22-Jun-2017 07:30:00

Drying is one of the most critical parts of making quality brick. There are a number of things that can be done to improve drying and reduce drying defects. In order to reduce cracking there needs to be an understanding of the drying process and understanding of the brick body that is being dried. 

Read more

Temaer: Structural, Refractory

How to reduce waste material during brick production?

By Jonathan Savage 08-Jun-2017 07:30:00

All brick and tile manufacturers strive for the elusive 100% yields, but in reality, the norm is anywhere from circa 50% upwards depending upon raw materials, products being produced and processes. These losses have been seen to occur in the extruding/moulding of the clay products, during the drying and firing processes and throughout all handling stages of production.

Read more

Temaer: Structural

Brick and roof tile manufacturing with less water involved

By Jonathan Savage 23-May-2017 00:00:00

Various amounts of water are added within brick and tile manufacturing depending upon which process route you choose. A stiff extrusion may have water content as low as 10% while a soft mud factory may be as high as 30%. With hand made and water-struck products, this water addition value may even go higher. However, although these levels of water may be advantageous for manufacturing, they still require to be driven out during the drying process to enable the products to be fired.

Read more

Temaer: Structural, Clay additives

How to reduce scumming from structural bricks without Barium Carbonate?

By Jonathan Savage 09-May-2017 13:02:00

Although the EU have downgraded Barium Carbonate from "Poisonous" to "Harmful If Swallowed", it is still treated as a toxic material in various countries across the world. However, its position as the most useful additive for the elimination of salt scumming from clay bricks and tiles is unchanged. For those countries where barium is prohibited, or due to increases in price and reduced availability, manufacturers look for alternatives.

Read more

Temaer: Structural, Scumming

BioKeram-logo-1 Additive-A Logo

A blog from BioKeram

BioKeram is a new range of products from Borregaard, the world's leading supplier of high performance biopolymers to the ceramics industry, with more than 50 years experience in the ceramics market. With this blog we aim to share our knowledge regarding ceramic process optimization.


Visit www.biokeram.com

 

Recent Posts

Search the blog